دانلود کتاب Advances in Micro and Nano Manufacturing and Surface Engineering: Proceedings of AIMTDR 2018

فهرست مطالب :

Front Matter ....Pages i-xxi
Front Matter ....Pages 1-1
Fabrication and Experimental Investigation of Micro-fluidic Channel-Based Mixing System Using Micro-electric Discharge Machining (Mamilla Ravi Sankar, Abhishek Sharma, Nuthi Dinesh Kumar, Siddharth Vikram, Mamidi Siva Kumar, Alokesh Pramanik et al.)....Pages 3-17
Compression and Diametral Tensile Strength Analysis of Graphene–Al2O3 Reinforced AA 2024 and AA 2219 Hybrid Nanocomposites (P. Ashwath, M. Anthony Xavior)....Pages 19-32
A New Approach for Fabrication of Complex-Shaped Arrayed Micro Electrodes ( Hreetabh, C. K. Nirala, A. Agrawal)....Pages 33-46
Fabrication of Micro-holes Array Through Multiple Electrodes with Distributed Μ-Pulsed Electrochemical Machining (Mahesh Thalkar, D. S. Patel, J. Ramkumar, V. K. Jain)....Pages 47-60
Effect of Water and KOH Aqueous Solution on Micro-slot Grinding of Silicon (Ashwani Pratap, Karali Patra)....Pages 61-70
Magnetic Effect on High-Speed Electrochemical Discharge (HSECD) Engraving (Mukund L. Harugade, Sachin D. Waigaonkar, Nikhil S. Mane, Narayan V. Hargude)....Pages 71-81
Bactericidal Nanostructured Titanium Surface Through Thermal Annealing (D. Patil, M. K. Wasson, V. Perumal, S. Aravindan, P. V. Rao)....Pages 83-92
A Study on the Effect of Oxalic Acid Electrolyte on Stainless Steel (316L) Through Electrochemical Micro-machining (J. R. Vinod Kumaar, R. Thanigaivelan, V. Dharmalingam)....Pages 93-103
Inkjet Printing-Based Micro-manufacturing of the Thin Film Electrodes for Flexible Supercapacitor Applications (Poonam Sundriyal, Pankaj Singh Chauhan, Shantanu Bhattacharya)....Pages 105-113
Multiresponse Optimization of Electrochemical Micro-machining Process Parameters of Micro-dimple Using TOPSIS Approach (B. Mouliprasanth, N. Lakshmanan, P. Hariharan)....Pages 115-127
Investigations into Micro-Hole Drilling on SS-304 by Sequential Electro-Micro Machining (R. M. Tayade, B. Doloi, B. R. Sarkar, B. Bhattacharyya)....Pages 129-140
Experimental Investigations to Evaluate Machining Accuracy of Ultrasonic-Assisted Milling on Thin-Walled Structures (Girish Chandra Verma, Pulak Mohan Pandey, Uday Shanker Dixit)....Pages 141-151
High-Speed Conduction-Mode Micro-Laser Welding of Thin SS-304 Sheets: Modeling and Experimental Validation (S. Patel, A. Aggrawal, A. Kumar, V. K. Jain)....Pages 153-165
Surface Roughness Improvement by Removal of Recast Layer on Wire Electrical Discharge Machined Surface Through Abrasive Flow Finishing Machine (M. A. Manjunath, A. Murugan, Prakash Vinod, N. Balashanmugam)....Pages 167-176
Investigations on the Influence of Size Effect on Surface Characteristics During Micro-End Milling of Inconel 718 (N. Anand Krishnan, G. Venkatesh, Jose Mathew)....Pages 177-187
Machining of Borosilicate Glass Using Micro-End Milling (K. Vipindas, Jose Mathew)....Pages 189-200
Parametric Optimization of Micro-electrical Discharge Drilling on Titanium (Siddhartha Kar, Promod Kumar Patowari)....Pages 201-210
Numerical Simulation of Micro-EDM Process by Incorporating a Novel Approach of Multi-sparks (Mahavir Singh, Devesh Kumar Chaubey, J. Ramkumar)....Pages 211-224
Analysis of Fiber Laser Micro-grooving on 316 L Stainless Steel (A. Sen, B. Doloi, B. Bhattacharyya)....Pages 225-235
Characterization of Cutting Edge Radius of a Single Crystal Diamond Tool by Atomic Force Microscopy (Akhilesh Gupta, G. Ganesan, Sonal Sonal, A. S. Rao, Rakesh G. Mote, R. Balasubramaniam)....Pages 237-248
Effect of Different Electrodes on Micro-feature Fabrication in Biomedical Co-29Cr-6Mo Alloy Machined Using µ-EDM Process (Siddhartha K. Singh, H. S. Mali)....Pages 249-257
Micro-tool Fabrication and Micro-ED Milling of Titanium Nitride Alumina Ceramic–Composite (Rupali Baghel, H. S. Mali, Vivek Baghela)....Pages 259-267
Experimental Investigations on the Effect of Energy Interaction Durations During Micro-channeling with ECDM (Tarlochan Singh, Akshay Dvivedi)....Pages 269-277
Influence of Chip Thickness Models on Deflection Aspects of an End Mill Cutter and a Spindle Bracket of a Miniaturized Machine Tool (Kadirikota Rajesh Babu)....Pages 279-287
Micro-hardness Improvement of HSS Using Tungsten Tool Through Micro-electrical Discharge Process (S. Mohanty, Avijit Roy, Brij Bhushan, A. K. Das, Amit Rai Dixit)....Pages 289-297
Nano-finishing of Internal Surface of Power Steering Housing Cylinder Using Rotational Magnetorheological Honing Process (S. K. Paswan, A. K. Singh)....Pages 299-307
Investigation and Evaluation of Erosion Efficiency in Micro-EDM Dressing of Biocompatible Ti6Al7Nb Material (M. S. Shah, P. Saha)....Pages 309-317
Correlation Between Mechanical Properties and Microstructure of Fe-Ti-Zn Alloys Fabricated by Powder Metallurgy (D. Arthur Jebastine Sunderraj, D. Ananthapadmanaban, K. Arun Vasantha Geethan, S. Vijayananth)....Pages 319-327
Experimental Investigations into Wire Electrical Discharge Machining Process for the Machining of Ti-6Al-4V (Mahavir Singh, V. K. Jain, J. Ramkumar)....Pages 329-337
Design and Development of Tool Electrode for Electrochemical Micromachining Using Reverse EMM Technique (S. Sangeethakrishnan, E. Rajkeerthi, P. Hariharan, G. Bhavesh)....Pages 339-347
Micro-dimple Array Fabrication by Through Mask Electrochemical Micromachining (S. Mahata, S. Kunar, B. Bhattacharyya)....Pages 349-360
Parametric Optimize and Surface Characterisation of Micro Electrical Discharge Machining Drilling Process (Jush Kumar Siddani, C. Srinivas, N. N. Ramesh)....Pages 361-369
Experimental Study of Nanosecond Fiber Laser Micromilling of Ti6Al4V Alloy (A. K. Sahu, H. A. Patel, J. Malhotra, S. Jha)....Pages 371-380
Evaluation of Side Wall Roughness and Material Removal Rate in Vibration Assisted Powder Mixed Micro-EDM Drilling on Inconel 718 (Deepak G. Dilip, Satyananda Panda, Jose Mathew)....Pages 381-389
Analysis of Effect of Heat Treatment on Machining Characteristics During Micro-end Milling of Inconel 718 (Ankit Awasthi, N. Anand Krishnan, Jose Mathew)....Pages 391-399
Modeling of Mechanical Residual Stresses in Micro-End Milling of Ti-6Al-4V Alloy (Y. Rahul, K. Vipindas, Kattari Muni Sekhar, Jose Mathew)....Pages 401-409
Machining of High-Quality Microchannels on Ti6Al4V Using Ultra-Short Pulsed Laser (Murugesh Munaswamy, G. L. Samuel)....Pages 411-422
Investigation of Electrochemical Micromachining Process Using Ultrasonic Heated Electrolyte (M. Soundarrajan, R. Thanigaivelan)....Pages 423-434
Front Matter ....Pages 435-435
Microstructure and Mechanical Properties of Atmospheric Plasma Sprayed 8YSZ Thermal Barrier Coatings (N. R. Kadam, G. Karthikeyan, D. M. Kulkarni)....Pages 437-446
Decoding the Grinding Zone—A Study on Track Grinding Wheels (Debaditya Chattopadhyay, Suresh Venkatraman)....Pages 447-460
Three Turn ECAP Processing of AA6061 Alloy: Microstructure and Mechanical Properties (Atul Dayal, Ankit Sahai, K. Hans Raj, R. S. Sharma)....Pages 461-472
Wear Performance Evaluation of AlCrN Based Coating Deposited by PVD Technique Under Dry and Cryogenic Environments (Abhishek Singh, S. Ghosh, S. Aravindan)....Pages 473-482
Numerical and Experimental Analysis of Plasma Nitrided XM-19 Stainless Steel (Shivanshu Dixit, R. K. Mishra, B. Ganguli)....Pages 483-500
Study on Actuation Characteristics of NiTiCu SMA Thin Film Deposited on Flexible Substrate (S. Jayachandran, A. Brolin, M. Harivishanth, K. Akash, I. A. Palani)....Pages 501-508
Influence of Laser Shock Peening on Wire Arc Additive Manufactured Low Carbon Steel (M. Manikandan, S. S. Mani Prabu, S. Jayachandran, K. Akash, I. A. Palani, K. P. Karunakaran)....Pages 509-516
Fluidity of A206 Cast Alloy with and Without Scrap Addition Using Thin Cross-Sectional Fluidity Test: A Comparison (Srinivasa Rao Pulivarti, Anil Kumar Birru)....Pages 517-525
Study on the Aesthetic Behavior of Anodic Oxidation in ADC12 Aluminum Alloy (S. Shanmugham, M. Kamaraj, S. K. Seshadri, V. P. Balaji, S. Karthi)....Pages 527-535
Development and Correlative Microstructural-Nanoindentation Investigation on Ni-Based + 10% Al2O3 Nanocomposite Microwave Clad on Hydroturbine Steel (Bhupinder Singh, Sunny Zafar)....Pages 537-546
Evaluation of Surface Characteristics of PTAW Hardfacing Based on Energy and Powder Supplied (D. D. Deshmukh, V. D. Kalyankar)....Pages 547-558
Electroless Nickel–Phosphorus Plating on SS304 Substrate with Al2O3 and WS2 Powder Suspended in Electrolytic Solution (Divit Saini, D. Taye, S. Mohanty, H. Bishwakarma, A. K. Das, N. K. Singh)....Pages 559-570
Influence of Heat Input on Corrosion Resistance of Duplex Stainless Steel Cladding on Low-Alloy Steel by FCAW (Manas Kumar Saha, Ajit Mondal, Ritesh Hazra, Santanu Das)....Pages 571-581
Study of Sliding Abrasive Wear Behaviour of TiC–TiB2 Composite Coating Fabricated on Titanium Alloy by TIG Cladding Method (D. Tijo, Ajay Sivasankaran Menon, Manoj Masanta)....Pages 583-591
Effect of Test Conditions on Tribological Behavior of NiTi–TiN-Coated Ti–6Al–4V Alloy Fabricated by TIG Cladding Method (Abhratej Sahoo, Dipak Tanaji Waghmare, Arti Sahu, Manoj Masanta)....Pages 593-601
Sliding Abrasive and Adhesive Wear Behavior of TIG-Cladded NiTi–W Coating Deposited on Ti–6Al–4V Alloy (Jyotirmoy Singh Garbyal, Chinmaya Kumar Padhee, Abdu Raheem, Manoj Masanta)....Pages 603-611
Investigation of Surface Coating on Inconel 718 Alloy with Silicon Carbide Powder (S. S. Nivas, P. Balasubramanian)....Pages 613-622
Effect of Sensitization on Electroless Nickel Plating of MoS2 Nanoparticles (N. Arunkumar, P. Eashwar Siddharth, Aravind Parthiban, K. Dhanapal, A. Stephen, N. E. Arun Kumar)....Pages 623-631
Laser Beam Treatment of Nimonic C263 Alloy: Study of Mechanical and Metallurgical Properties (A. K. Sharma, M. Anand, Vikas Kumar, Shakti Kumar, A. K. Das)....Pages 633-646
Evaluation of Mechanical Properties of Ti6Al4V Built by Composite Coating of WS2, CNT, Ni, and Ti6Al4V Powders Through Laser Cladding Process (Shakti Kumar, Umar Arif, Vikas Kumar, M. Anand, R. Tyagi, Amitava Mandal et al.)....Pages 647-661
Towards Extending ECAP Technology from Lab Scale to Manufacturing by Enhanced Multipass Continuous ECAP Process (Ankit Sahai, Atul Dayal, R. S. Sharma)....Pages 663-671
The Effect of Normal Load and Sliding Frequency on the Reciprocating Friction Behavior of Nanocrystalline CuO-Based Alumina Ceramics (Partha Haldar, Tapas Kumar Bhattacharya, Nipu Modak)....Pages 673-681
Increase in Hardness and Wear Resistance of Ti-6Al-4V Surface by In Situ Laser Coating of Ti- and Al-Based Hard Ceramics (Dipanjan Dey, Kalinga Simant Bal, Imran Khan, Ishan Bangia, Anitesh Kumar Singh, Asimava Roy Choudhury)....Pages 683-691
Effect of Sigma Phase on Dry Sliding Wear Resistance and Surface Roughness of ASTM A890 Grade 6A Duplex Stainless Steels (P. Nithin Raj, Anandu P. Sivan, V. Riyas, K. Sekar, M. A. Joseph)....Pages 693-701
Investigation on the Structural and Wear Characteristics of Mg AZ91/Fly Ash Surface Composites Fabricated by Friction Stir Processing (Hemendra Patle, B. Ratna Sunil, Ravikumar Dumpala)....Pages 703-710
Atmospheric Plasma Sprayed 25 wt.% WO3-75wt.% SnO2 Composite Coating: Investigations on Ethanol and Acetone Sensing Characteristics (Vibhav Ambardekar, P. P. Bandyopadhyay, S. B. Majumder)....Pages 711-719
Microstructural and Size Accuracy Study of Electrochemical Machined Aluminium Alloy Features (R. K. Sahu, Vijay Kumar Pal, Pankaj Kumar)....Pages 721-729
Establishing EDM as a Method for Inducing Hydrophobicity on SS 304 Surfaces (S. Jithin, Upendra V. Bhandarkar, Suhas S. Joshi)....Pages 731-740