دانلود کتاب Innovations in Energy, Power and Thermal Engineering: Select Proceedings of ICITFES 2020

فهرست مطالب :

Preface
Acknowledgements
Contents
About the Editors
Exergy Comparative Investigation of Pyramid Shape Solar Stills
1 Introduction
2 Materials and Methodology
2.1 The Exergy Analysis
3 Result and Discussion
3.1 Variation of the Ambient Condition and Experimental Values in CPSS and SPSS
3.2 Variation of Exergy Loss to Brine
3.3 Variation of Exergy Loss to the Environment
3.4 Variation of Sun Radiation Exergy Sun Radiation and Exergy Destruction
4 Conclusion
References
Experimental Analysis on a Designed and Fabricated Cost Effective Solar Pond Model
1 Introduction
2 Theoretical Calculations
3 Design and Fabrication
4 Results and Conclusions
References
Concentrated Solar Flux Assessment of Water Lens Collector
1 Introduction
2 Experimental Setup
3 Results and Discussion
4 Conclusion
References
Comparison of Performance of PV Module for Different Cooling Techniques
1 Introduction and System Description
2 Cooling System Description
3 System Components and Instrument Specifications
4 Experimental Methodology
5 Numerical Calculations
6 Results and Discussion
6.1 Experimental Analysis of Fully Wetted Absorber Type Cooling System
7 Performance Analysis of Serpentine Coil Type Cooling System
7.1 Electrical Power and Efficiency Characteristics
7.2 Thermal and Overall Efficiency Variation with Time
8 Conclusions
References
Experimental Investigation of Drying Cucumber in a Double Slope Solar Dryer Under Natural Convection and Open Sun Drying
1 Introduction
2 Experimental Setup
3 Efficiency Calculation
3.1 Moisture Content
3.2 Moisture Ratio
3.3 Pickup Efficiency
3.4 Effective Moisture Diffusivity
3.5 Activation Energy
4 Analysis
4.1 Energy Analysis
4.2 Exergy Analysis
5 Results and Discussion
6 Conclusion
References
Performance Enhancement and Exergy Analysis of Thermosyphon ETSC with TiO2 + CuO Hybrid Nanofluid
1 Introduction
2 Experimentation
2.1 Hybrid Nanofluid Preparation by Using Two-Step Method
2.2 Experimentation Procedure
3 Results and Discussion
3.1 Effect of Hybrid Nanofluid on Energy and Exergy Efficiency
3.2 Average Energy, Exergy Efficiencies for Various Arrangements
4 Conclusion
References
Assessing District—Wise Wind Energy Potential of Odisha, India by Observance of Tropical Cyclone Vulnerability
1 Introduction
2 Study Area, Data and Methodology
3 Results and Discussions
3.1 Evaluating the Districts Based on Natural Hazard Assessment
3.2 Mean Wind Climatology and Wind Energy Potential Over Odisha
3.3 Weibull Probability Density Function (WPDF) Analysis
3.4 Annual Mean Wind Variation at Different Height Intervals
4 Conclusions
References
Performance Study of an Inclined Bubbling Fluidized Bed Dryer During Cashew Nut Drying
1 Introduction
2 Materials and Methods
2.1 Drying Parameters
3 Results and Discussion
3.1 Hydrodynamic Behaviour
3.2 Drying Characteristics
3.3 Energy Consumption
4 Conclusions
References
Performance Analysis of Spark Ignition Engine for Different Energy Shares of Biomethane
1 Introduction
2 Experimental Setup
3 Results and Discussion
4 Conclusion
References
Effects of Water-Diesel Emulsification on Performance and Emission Characteristics of CI Engine: A Review
1 Introduction
2 Water-Diesel Emulsion
3 Types of Emulsion
4 Results and Discussion
4.1 Performance Characteristics
4.2 Emission Characteristics
5 Conclusion
References
Combustion Analysis of a Diesel Engine Run on Non-conventional Fuel at Different Nozzle Injection Pressure
1 Introduction
2 Experimental
3 Results and Discussion
3.1 Cylinder Pressure History
3.2 Ignition Delay (ID)
3.3 Maximum Cylinder Pressure
3.4 Maximum Heat Release Rate (MHRR)
3.5 Cumulative Heat Release (CHR)
3.6 Mass Fraction Burned (MFB)
4 Conclusion
References
Effects of Port Fuel Injection of Calophyllum Inophyllum Biodiesel on the Performance and Emission Characteristics of a DI Diesel Engine
1 Introduction
2 Materials and Methodology
2.1 Calophyllum Inophyllum Methyl Ester (CIME) Preparation
2.2 Experimental Setup
3 Results
3.1 Brake Thermal Efficiency
3.2 Brake Specific Fuel Consumption
3.3 Oxides of Nitrogen
3.4 Carbon Monoxide
3.5 Unburned Hydrocarbons
3.6 Cylinder Pressure
3.7 Heat Release Rate
4 Conclusion
References
Combustion Parameters of LHR Diesel Engine Fueled with Jatropha Biodiesel and Its Blends
1 Introduction
2 Materials and Methods
2.1 Preparation of LHR
2.2 Experimental Method
2.3 Designation of Materials
3 Results and Discussions
3.1 Combustion Characteristics
4 Conclusions
References
Experimental Investigation on Modified Catalytic Converter with Metal Oxide as Catalyst in SI Engine with Gasohol Fuel
1 Introduction
2 Methodology
2.1 Selection of Catalyst
2.2 Sol-Gel Preparation for Catalyst
2.3 Fabrication of Catalytic Converter and Catalyst Coating Technique
3 Experimentation
4 Result and Discussion
4.1 Regulated Emissions
4.2 Unregulated Emissions
5 Conclusions
References
Comparison of Thermal and Emission Performance of Canister Based Methanol Cookstove with Kerosene Wick Cookstove
1 Introduction
2 Experimental Methodology
2.1 Cookstoves and Fuels
2.2 Experimental Procedure
3 Results and Discussions
3.1 Thermal Efficiency
3.2 Emissions and Combustion Efficiency
4 Conclusions
References
Numerical Study on Melting of Al2O3 Nanoparticles Dispersed Paraffin Wax in a Copper Foam
1 Introduction
2 Problem Formulation
3 Time and Grid Independence Test
4 Numerical Validation
5 Results and Discussions
5.1 Impact of Orientation
5.2 Melting Process in Copper Foam
6 Conclusion
References
Numerical Analysis of Dry Nitrogen-Water Chilling Unit of an Air Separation Unit
1 Introduction
2 Governing Equations
3 Modeling and Simulation
4 Results and Discussions
5 Conclusions
References
Numerical Investigation of Cryogenic Liquid Sloshing—A Sigma Transformation Approach
1 Introduction
2 Mathematical Formulation
3 Mapping Technology
3.1 Sigma Transformation
4 Numerical Analysis
4.1 Adams–Bashforth Method
5 Result and Discussion
5.1 Turning and Lane Changing Acceleration
6 Conclusion
References
Hot Air Drying Characteristics and Quality Analysis of Ginger (Zingiber Officinale): Effect of Pretreatment and Process Intermittency
1 Introduction
2 Materials and Methods
2.1 Materials and Sample Preparation
2.2 Pretreatment of Sample
2.3 Hot Air Drying
2.4 Intermittent Drying
2.5 Physical Quality Analysis
3 Results and Discussions
3.1 Drying Kinetics
3.2 Shrinkage
3.3 Rehydration Ability
4 Conclusion
References
Stating and Deriving Bernoulli’s Theorem as a Special Case of Steady Flow Energy Equation
1 Introduction
2 Derivation of Bernoulli\'s Theorem by Euler’s Equation
3 Derivation of SFEE by Energy Balance
4 Derivation of Bernoulli\'s Equation as a Special Case of SFEE
4.1 Assumption-1: There is no Heat Interaction Between System and Surrounding
4.2 Assumption-2: There is no Work Interaction Between System and Surrounding
4.3 Assumption-3: Internal Energy of the Fluid is Same Through the Flow
4.4 Assumption-4: No Throttling or Iso Enthalpic Process is Possible
4.5 Simplification to Bernoulli Equation
5 Results and Future Scope
References