دانلود کتاب Mechanical Behaviour of Materials. Proceedings of the Fourth International Conference, Stockholm, Sweden, 15–19 August 1983

فهرست مطالب :

Content:
INTERNATIONAL SERIES ON THE STRENGTH AND FRACTURE OF MATERIALS AND STRUCTURES, Page ii
Front Matter, Page iii
Copyright, Page iv
PREFACE, Pages xxi-xxii, Jance Carlsson, N.G. Ohlson
MATERIALS ASPECTS OF CRACK TIP YIELDING AND SUBCRITICAL CRACK GROWTH IN ENGINEERING ALLOYS, Pages 3-29, J. Lankford
MODERN MANUFACTURING AND PERFORMANCE CONCEPTS OF COMPOSITE MATERIALS, Pages 31-32, G. Lubin
COMPARISON BETWEEN EXPERIMENTAL AND THEORETICAL FORMING LIMIT DIAGRAMS, Pages 33-49, A. Melander
LIMITS TO FORMABILITY IN RATE-SENSITIVE METAL SHEETS, Pages 51-65, A. Needleman, V. Tvergaard
CONSTRAINED GRAIN BOUNDARY CAVITATION IN A CREEPING BODY CONTAINING A MACROSCOPIC CRACK, Pages 67-78, H. Riedel
HIGH TEMPERATURE DEFORMATION AND FAILURE OF WELDED JOINTS, Pages 79-101, J.A. Williams
SIMPLIFIED DESIGN PROCEDURES FOR COMPOSITE MATERIALS, Pages 103-114, S.W. Tsai
MECHANICAL PROPERTIES OF STRUCTURAL MATERIALS AT LOW TEMPERATURES WITH REFERENCE TO THE TYPE OF STRESSED STATE AND MODE OF LOADING, Pages 115-128, G.S. Pisarenko, A.A. Lebedev, V.A. Strizhalo
FACTORS AFFECTING PLASTIC INSTABILITY AND SHEET FORMABILITY, Pages 129-138, S.S. Hecker
CONSTITUTIVE LAWS OF 316 STAINLESS STEEL IN HIGH TEMPERATURE CREEP BY BIAXIAL EXPERIMENTS, Pages 141-147, P. Delobelle, C. Oytana, A. Mermet
CONSTITUTIVE RELATIONSHIPS FOR CREEP-FATIGUE IN HIGH-TEMPERATURE MATERIALS, Pages 149-156, A. Berkovits, S. Nadiv
HIGH TEMPERATURE LOW CYCLE FATIGUE OF TWO AUSTENITIC STAINLESS STEELS — A COMPARISON BETWEEN MECHANICAL PROPERTIES AND MICROSTRUCTURE, Pages 157-164, J.-O. Nilsson
CREEP MODELING OF TEXTURED ZIRCALOY UNDER BIAXIAL STRESSING, Pages 165-173, B.L. Adams, K.L. Murty
THERMAL FATIGUE TEST BY DIRECT PASSAGE METHOD OF LARGE ELECTRIC CURRENT ON STAINLESS STEELS, Pages 175-181, K. Kamachi, N. Tani, T. Ishida, M. Kawano, T. Kuhohori
THE PREDICTIVE CAPABILITY OF THREE HIGH TEMPERATURE LOW CYCLE FATIGUE MODELS IN THE ALLOY IN-738, Pages 183-189, M.Y. Nazmy, C. Wüthrich
REHEAT CRACKING DURING STRESS RELIEF ANNEALING — A NUMERICAL APPROACH, Pages 191-197, L. Josefson
INFLUENCE OF PRESTRESS ON THE YIELD SURFACE OF THE CAST NICKEL SUPERALLOY MAR-M002 AT ELEVATED TEMPERATURE, Pages 199-205, M.R. Winstone
FATIGUE CRACK PROPAGATION IN STAINLESS STEEL SUBJECTED TO REPEATED THERMAL SHOCK, Pages 207-213, M. Shimizu, M.W. Brown, K.J. Miller
A STUDY OF CREEP BEHAVIOR OF WELDED JOINT, Pages 215-221, M. Toyoda, K. Satoh
EFFECT OF CYCLIC STRAIN ON CUMULATIVE FATIGUE DAMAGE OF TYPE 304 STAINLESS STEEL AT HIGH TEMPERATURE, Pages 223-229, H.L. Nguyen, T. Bui-Quoc
THE EFFECTS OF THE WAVY GRAIN BOUNDARIES ON THE CREEP FRACTURE BEHAVIOR IN UDIMET-700 ALLOY, Pages 231-237, Guixiong Guo, Huiwang Shen, Qigong Cai
THE NON-ISOTHERMAL FATIGUE TESTS AND ANALYSIS, Pages 239-245, K. Bohatec, C. Budac, J. Zdarek
THERMAL FATIGUE BEHAVIOUR OF MAR M509 SUPERALLOY, Pages 247-253, F. Rezai-Aria, L. Rémy, C. Herman, B. Dambrine
THERMAL FATIGUE OF A THERMALLY UNSTABLE ALLOY, Pages 255-261, G. Cailletaud, J.P. Culié, H. Kaczmarek
OXIDE WEDGING EFFECTS ON NEAR THRESHOLD FATIGUE CRACK GROWTH AT ELEVATED TEMPERATURE, Pages 263-264, R. Yuuki, H. Kitagawa, Y. Miki
CREEP IN WELDED JOINTS IN FERRITIC AND MARTENSITIC STEELS, Pages 265-271, B. Ivarsson
THERMAL STRESSES, PLATE MOTION AND HOT CRACKING IN BUTT-WELDING, Pages 273-279, M. Jonsson, L. Karlsson, L-E. Lindgren
RELATIVE IMPORTANCE OF INITIATION AND PROPAGATION PHASES ON THE HIGH TEMPERATURE LOW CYCLE FATIGUE BEHAVIOUR OF A NICKEL SUPERALLOY, Pages 281-288, V.T.A. Antunes
INFLUENCE OF STATE OF STRESS ON CREEP FAILURE OF 2 1/4% Cr1%Mo STEEL, Pages 289-295, K.D. Al-Faddagh, G.A. Webster, B.F. Dyson
THE USE OF FRACTURE MECHANICS APPROACH TO EVALUATE THE RELIABILITY OF A NOZZLE WELD ASSEMBLY IN POWER PLANT VESSELS, Pages 297-298, I.V. Gorynin, V.A. Ignatov, B.T. Timofeyev
THE EFFECT OF ORDERING ON THE HIGH TEMPERATURE DEFORMATION OF NICKEL BASED ALLOYS, Pages 299-305, A. Marucco, B. Nath
INFLUENCE OF GRAIN ORIENTATIONS ON THE MECHANICAL PROPERTIES AND FRACTURE CHARACTERISTICS IN A DIRECTIONALLY SOLIDIFIED SUPERALLOY, Pages 307-314, Minggao Yan, Guohuan Zhang, Hengfei Ni
INFLUENCE OF CYCLIC LOADING ON CRACK GROWTH OF A ½%Cr ½%Mo 1/4%V STEEL, Pages 315-322, D.J. Smith, G.A. Webster
DAMAGE MECHANICS APPLIED TO HIGH TEMPERATURE FATIGUE, Pages 323-329, A. Plumtree, J. Lemaitre
GENERALIZATION OF MINDLIN\'S KINEMATICAL PLATE THEORY FOR ANISOTROPIC MATERIALS, Pages 331-336, E.E. El-Soaly
EXPERIMENTAL CREEP MECHANISM MAPS FOR METALS, Pages 337-343, G. Malakondaiah, P. Rama Rao
THE INFLUENCE OF MULTIAXIALITY OF STRESS AND ENVIRONMENTAL INDUCED DEGRADATION ON THE CREEP BEHAVIOUR OF ALLOY 800H TUBULAR COMPONENTS, Pages 345-351, R.C. Hurst
ON THE CONTACT FATIGUE RESISTANCE OF THE COBALT ALLOY COATING AND ITS MICROMECHANISMS, Pages 355-361, Fuhsing Wang, Chikung Tsi, Yungsin Chang
TRIBOLOGICAL CHARACTERISTICS OF STEEL 20Cr2Ni4 AFTER COMPLEX THERMOCHEMICAL TREATMENT, Pages 363-368, T.C. Gao, T.C. Lei
SYNTHESIS AND TESTING OF FOAM FILLED FRP SHELL FOR STATIC CRUSHING AND IMPACT, Pages 369-376, K.A. Jacob, J. Jayaraman
FRETTING IN ELECTRICAL CONTACTS, Pages 377-383, M. Braunović
COMPARING THE ABRASIVE AND EROSIVE RESISTANCE OF SOME FLAME SPRAYED COATINGS AND NITRIDED STEEL SURFACES, Pages 385-391, U. Bryggman, S. Hogmark
THE SURFACE LAYER FATIGUE FAILURE OF HEAT-RESISTING STEELS AT HIGH TEMPERATURE AND THE PROTECTIVE EFFECT OF ALLOY COATINGS, Pages 393-398, Zhongxing Wu, Baochu Wang, Dashen Jin, Meiying Xie, Xin Liu, Shiqin Lu
CREEP PROPERTIES OF ELECTRON BEAM EVAPORATED Ni-Al₂O₃ CONDENSATES, Pages 399-400, B.E. Jacobson
DIFFUSION BARRIERS USED TO IMPROVE STRUCTURAL STABILITY AND MECHANICAL PROPERTIES OF W FIBRE-Ni MATRIX COMPOSITES AT ELEVATED TEMPERATURES, Pages 401-407, R. Ahlroth, P. Kettunen
MECHANICAL PROPERTIES OF PLASMA SPRAYED AND POST-TREATED FeCrA1Y-COATINGS, Pages 409-420, C. Burman, T. Ericsson
THE CAVITATION EROSION OF COATED AND SURFACE TREATED STEELS, Pages 421-428, A. Barletta, A. Ball
A CORRELATION BETWEEN FRACTURE ENERGY AND FRACTURE MORPHOLOGY IN MIXED-MODE FRACTURE OF COMPOSITES, Pages 431-438, H.T. Hahn, T. Johannesson
OPTIMUM DESIGN OF LAMINATED PLATES WITH FIBRE REINFORCED (COMPOSITE) MATERIALS, Pages 439-441, Yongqiu Jiang, Yeong-Chiou Chiang
MECHANICAL PROPERTIES OF BAMBOO-MESH REINFORCED CEMENT COMPOSITES, Pages 443-450, M.A. Mansur, M.A. Aziz
THE INFLUENCE OF MICROSTRUCTURE ON COMPOSITE STRENGTHENING, Pages 451-456, R.J. Arsenault, R.M. Fisher
MICROSTRESS REDISTRIBUTION IN FIBRE-REINFORCED COMPOSITES DUE TO TIME-DEPENDENT PROCESSES, Pages 457-463, V. Kafka
MATERIAL DESIGN OF FIBROUS LAMINATED COMPOSITES WITH REQUIRED FLEXURAL STIFFNESS, Pages 465-471, M. Miki
INFLUENCE OF MATRIX RESIN ON ULTIMATE STRENGTH OF UNIDIRECTIONAL CFRP, Pages 473-479, Y. Miyano, M. Kanemitsu, T. Kunio, M. Miki
EFFECT OF FIBER ORIENTATION ON STABLE CRACK GROWTH IN FRP, Pages 481-487, T. Kunio, M. Shimizu, S. Sohmiya
NONDESTRUCTIVE EVALUATION OF COMPOSITE MATERIALS — A DESIGN PHILOSOPHY, Pages 489-495, J.C. Duke Jr., E.G. Henncke II, W.W. Stinchcomb, K.L. Reifsnider
CREEP BEHAVIOUR OF REINFORCED AND NON-REINFORCED RESINS, Pages 497-505, M.W. Darlington, A.T. Marques
INTERFACIAL FAILURE IN STEEL FIBER REINFORCED POLYSTYRENE IMPREGNATED MORTAR, Pages 507-515, T. Ertürk, M. Tokyay
THE EFFECT OF EXTREME TEMPERATURES ON THE ELASTIC PROPERTIES AND FRACTURE BEHAVIOR OF GRAPHITE/POLYMIDE COMPOSITES, Pages 517-523, D.H. Morris, R.A. Simonds
DEFORMATION AND FAILURE OF THIN WALLED FILAMENT WOUND GRP TUBES SUBJECTED TO TRANSVERSE IDENTIFICATION, Pages 525-532, M.G. Bader, R.P. Harrison, M.J. Hinton
RELIABILITY-BASED FATIGUE-PROOF DESIGN OF COMPOSITE MATERIALS, Pages 533-537, H. Ishikawa, A. Tsurui, T. Tanimoto, H. Kimura
RESIDUAL STRENGTH DEGRADATION MODEL FOR GLASS/POLYESTER LAMINATES UNDER REPEATED TENSION AND COMPRESSION LOADINGS, Pages 539-547, T. Tanimoto, H. Ishikawa, S. Amijima, H. Kimura
ON THE USE OF THE THREE POINT BEND AND COMPACT TENSION SPECIMENS TO MEASURE FRACTURE TOUGHNESS OF COMPOSITE LAMINATES, Pages 549-555, C.E. Harris, D.H. Morris
ACOUSTIC EMISSION FROM FILAMENT WOUND PIPES UNDER LONG TERM LOADING CONDITIONS, Pages 557-563, L. Golaski, D. Hull, M. Kumosa
A STUDY ON INTERLAMINAR SHEAR STRENGTH OF COMPOSITES, Pages 565-571, Shuangyin Zhang
TOUGHNESS OF THIN SLABS UNDER FLEXURAL OR IMPACT LOADING, Pages 573-580, N.I. Fattuhi
MEASUREMENT OF INTERFACIAL SHEAR STRENGTH IN GRAPHITE FIBER/ALUMINUM MATRIX COMPOSITES, Pages 581-585, V. Provenzano, R.J. Weimer, S.C. Sanday
MECHANICAL BEHAVIOR OF A SHORT FIBER COMPOSITE, Pages 587-593, Göran Tolf
DELAMINATION AND TRANSVERSE FRACTURE IN GRAPHITE/EPOXY MATERIALS, Pages 595-601, W.L. Bradley, R.N. Cohen
COMPUTER-AIDED PREDICTION OF SHEET METAL MANUFACTURING PROCESSES AND ITS EXPERIMENTAL VERIFICATION, Pages 605-610, D. Lee, P.A. Stine
ON THE LAW OF STRENGTH OF DUAL-PHASE PLAIN CARBON STEELS AS NATURAL COMPOSITE MATERIALS, Pages 611-617, T.C. Lei, K. Liu
MATERIAL INHOMOGENEITY AND SURFACE ROUGHENING DURING PLASTIC DEFORMATION, Pages 619-625, T. Abe, S. Nagaki
THE INFLUENCE OF MICROSTRUCTURE AND TEXTURE ON THE FORMING PROPERTIES OF A DUAL PHASE Al-KILLED STEEL, Pages 627-628, C.S. da Costa Viana, L.P. Mendonça Brandao
LOCALIZED FLOW (SHEAR BANDS) IN Al AND Al-3%Mg ALLOY, Pages 629-630, Y. Nakayama, K. Morii
INSTABILITY IN PLASTIC BENDING OF THIN SHEET METAL, Pages 631-639, J.L. Duncan, M. Sue-Chu, X.J. Wang
TEST METHODS FOR FORMABILITY OF HOT ROLLED STEEL SHEETS, Pages 641-648, M. Lindberg, L. Melin
ANALYSIS OF PLASTIC INSTABILITY IN SHEET-METAL FORMING, Pages 649-655, G. Ferron, M. Mliha-Touati
THE EFFECT OF NON-LINEAR STRAIN PATHS ON THE PLASTIC PROPERTIES OF STEELS, Pages 657-658, T. Davis, W.B. Hutchinson
FORMING LIMITS OF TITANIUM SHEETS, Pages 659-664, S. Kohara, M. Katsuta, K. Aoki
EFFECT OF MATRIX AND SECOND PHASE ON THE MAXIMUM UNIFORM STRAIN OF METALS, Pages 665-671, Mingzhi Huang, Jingxi Luo, Baoping He
SOME PROBLEMS ABOUT STRAIN HARDENING EXPONENT OF METALS, Pages 673-680, Mingzhi Huang, Jingxi Luo, Baoping He
ON THE PREDICTION OF FORMING LIMIT DIAGRAMS FOR ANISOTROPIC SHEETS, Pages 681-685, K.W. Neale, E. Chater
A MATERIALS MODEL FOR STRAIN SOFTENING WITH APPLICATIONS IN MODELING STRAIN LOCALIZATION, Pages 687-693, T.C. Lowe, A.K. Miller
RELATIONSHIP BETWEEN STRUCTURE AND MECHANICAL BEHAVIOUR OF Al-10wt%Cu ALLOYS PRODUCED BY RHEOCASTING, Pages 695-702, N.A. El-Mahallawy, N. Fat-Halla, M.A. Taha
DIRECT OBSERVATIONS OF THE MICROMECHANISMS OF FRACTURE IN POLYMERIC SOLIDS USING THE SCANNING ELECTRON MICROSCOPE, Pages 705-710, D.G. Gilbert, P.W.R. Beaumont, W.C. Nixon
FATIGUE CRACK PROPAGATION IN VISCOUS ENVIRONMENTS, Pages 711-717, J.L. Tzou, S. Suresh, R.O. Ritchie
AN INVESTIGATION OF VOID DISTRIBUTION IN NECKING REGION AND TENSILE FRACTURE CHARACTERISTICS OF DUAL-PHASE STEEL 1010, Pages 719-724, B.D. Hong, T.C. Lei
FRACTURE TOUGHNESS AND X-RAY DIFFRACTION OBSERVATION OF FRACTURE SURFACE OF DUCTILE CAST IRON, Pages 725-731, Z. Yajima, Y. Hirose, K. Tanaka
STRESS AND STRAIN FIELDS AROUND INCLUSIONS IN A PLASTICALLY DEFORMING MATRIX, Pages 733-737, R.D. Thomson, J.W. Hancock
THE USE OF J-RESISTANCE CURVES TO CHARACTERIZE THE EFFECTS OF MICROSTRUCTURE, STRENGTH AND IRRADIATION ON FRACTURE MICROMECHANISMS IN NUCLEAR REACTOR PRESSURE TUBES, Pages 739-746, L.A. Simpson
STANDARD METHOD OF TEST FOR ELASTIC-PLASTIC FRACTURE TOUGHNESS J_IC RECOMMENDED IN JAPAN, Pages 747-753, H. Miyamoto, H. Kobayashi, N. Ohtsuka
EFFECT OF CRACK CLOSURE ON NEAR-THRESHOLD CRACK GROWTH BEHAVIOUR IN A HIGH STRENGTH Al-ALLOY UP TO ULTRASONIC FREQUENCIES, Pages 755-762, A.F. Blom, A. Hadrboletz, B. Weiss
CREEP CRACK INITIATION AND GROWTH IN AN AUSTENITIC STAINLESS STEEL, Pages 763-769, E. Maas, A. Pineau
FLAWS, FRACTURE MECHANISMS AND HERTZIAN CRACKS IN BRITTLE SOLIDS, Pages 771-777, I. Finnic, D. Dolev
ON THE WEIBULL MODEL OF CLEAVAGE FRACTURE, Pages 779-785, D. Qu, X.W. Wang, C.K. Tsai
THE ASSESSMENT OF THE FRACTURE TOUGHNESS OF Fe-Ni-C ALLOYS WITH AUSTENITIC AND AUSTENITE-MARTENSITE STRUCTURES, Pages 787-794, N.J. Hurd, R. Brook
FATIGUE CRACK GROWTH RETARDATION IN AN ULTRA HIGH CARBON STEEL, Pages 795-801, H. Toyoda, M. Saito, S. Ohta
STRETCH ZONE, DUCTILITY AND TOUGHNESS STUDIES IN THE TRANSITION REGION OF 1045 STEEL, Pages 803-809, M.R. Bayoumi, M.N. Bassim
STUDY ON FRACTURE PROCESS OF NITRIDED CASES OF STEEL 30CrMo WITH ACOUSTIC EMISSION TECHNIQUE, Pages 811-816, Shouhua Zhang, Qingfu He, Shihui Song, Weiming Huang, Yang Deng, Yaoxin Zeng
FINITE ELEMENT ANALYSIS OF FATIGUE CRACK CLOSURE IN COMPACT SPECIMEN, Pages 817-823, H. Nakamura, H. Kobayashi, S. Yanase, H. Nakazawa
THE EFFECT OF INTERMITTENT REST PERIODS AT ELEVATED TEMPERATURES ON THE FATIGUE PROPERTIES OF 4140 STEEL, Pages 825-831, Song-Hee Kim
FAILURE PREDICTIONS BASED ON TEARING INSTABILITY AND LIMIT LOAD – A PARAMETER STUDY, Pages 833-839, L. Hodulak
FATIGUE CRACK PROPAGATION AND THRESHOLD OF TYPE 304L AUSTENITIC STAINLESS STEEL, Pages 841-847, N.E. Atanasiu, B.R. Irimescu
THE EFFECTS OF THE SIZE OF THE SECOND PHASE PARTICLES ON THE MECHANICAL PROPERTIES OF A LOW ALLOY STEEL, Pages 849-855, Youshi Hong, Yuhgong Yeh, Xiaoxin Xia
FRACTURE TOUGHNESS OF CAST IRON, Pages 857-863, J. Pirs
FRACTURE TOUGHNESS OF TUNGSTEN-FREE TiC- AND (Ti)C, N-BASE HARD ALLOYS AND ITS RELATION TO THE MICROSTRUCTURE, Pages 865-871, M. Loshak, N. Konovalenko, T. Shapoval, M. Dudkin
EXPERIMENTAL DETERMINATION OF HOLE INITIATION CRITERIA AT INCLUSIONS IN LOW ALLOY STEEL AND SPHEROIDAL GRAPHITE CAST IRON, Pages 873-879, Sung Kang Hur, Sun Yao Qing, D. Francois
A COMPUTER SIMULATION OF DUCTILE BEHAVIOUR IN TWO STEELS OF MEDIUM AND LOW STRENGTH, Pages 881-886, I.C. Howard, Guo Chen Li
A CRITICAL ASSESSMENT OF THE THRESHOLD STRESS INTENSITY FACTOR, Pages 887-894, B. Cina
A COMPARISON OF J_Ic, STRETCHED ZONE SIZE AND CRACK OPENING DISPLACEMENT IN A FERRITIC STEEL, Pages 895-902, V. Provenzano, C.M. Gilmore, F.A. Smidt, J.R. Hawthorne
ASSESSMENT OF DUCTILE FRACTURE RESISTANCE BASED ON AN ENGINEERING APPROACH, Pages 903-910, V. Kumar, M.D. German, D.F. Mowbray
FATIGUE CRACK GROWTH AT HIGH STRAIN AMPLITUDES, Pages 911-917, C. Wüthrich, W. Hoffelner
COMPARATIVE STUDY OF CRACK RESISTANCE PROPERTIES OF THREE DIFFERENTLY ALLOYED HSLA STEELS, Pages 919-925, A. Radović, S. Sedmak, Lj. Nedeljković
NEW APPROACHES IN FRACTURE MECHANICS, Pages 927-934, K.B. Broberg
ON CRACK PROBLEMS RELATED TO WELDING RESIDUAL STRESS FIELDS IN LINEAR ELASTIC FRACTURE MECHANICS, Pages 935-941, X.R. Wu, J. Carlsson
A DISTRIBUTED DAMAGE APPROACH TO COMBINED BENDING AND AXIAL LOADING OF ROCK BEAMS, Pages 943-949, F. Ouchterlony
THREE METHODS FOR DETERMINING THE J-R CURVE DIRECTLY FROM A LOAD DISPLACEMENT RECORD, Pages 951-957, S. Kaiser
AN ELASTIC-PLASTIC ANALYSIS OF RELATIONSHIPS BETWEEN K_I, J AND CTOD, Pages 959-965, S. Pilcer, N.G. OhlsoiT
STRESS HOLD TIME, STRESS RATE AND FREQUENCY EFFECTS ON FRACTURE UNDER CORROSIVE ENVIRONMENT AND UNDER HIGH TEMPERATURE CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION CONDITIONS, Pages 967-981, Takeo Yokobori, A. Toshimitsu Yokobori Jr, N. TakasiT
CREEP, FATIGUE AND ENVIRONMENT INTERACTIONS IN LOW ALLOY STEELS, Pages 983-989, A. Narumoto
PHENOMENON AND APPLICATIONS OF THE RECOVERY-INDUCED THERMAL DEFORMATION OF THERMOPLASTICS, Pages 991-998, T. Machida, T. Okai, F. Hamayoshi
THERMAL FATIGUE OF STRUCTURAL MATERIALS WITH REGARD TO STRUCTURAL STRESSES, Pages 999-1004, Y.F. Balandin, A.F. Malyguin, Y.V. Yankovsky
HIGH-TEMPERATURE BEHAVIOUR OF STEELS WITH PHASE TRANSFORMATION AND THE SIMULATION OF QUENCHING AND WELDING PROCESSES, Pages 1005-1011, T. Inoue, Z.G. Wang
PRODUCTION AND MECHANICAL PROPERTY OF CLAD-METALS LAMINATED WITH PARTICLE REINFORCED COMPOSITE METAL AND CERAMIC POWDER, Pages 1013-1021, Manabu Kiuchi, Sumio Sugiyama
FRACTURE BEHAVIOUR OF PRESSURE VESSEL SHELLS PLATED WITH ANTICORROSIVE CLADDING, Pages 1023-1031, V.A. Ignatov, B.T. Timofeyev, V.A. Fedorova
DELAYED FAILURE OF INELASTIC COMPOSITES, Pages 1033-1038, J.V. Suvorova
FINITE ELEMENT ANALYSIS OF THERMAL RESIDUAL STRESSES IN ANTISYMMETRICALLY LAMINATED COMPOSITES, Pages 1039-1045, T. Hirai, A. Inoue, T. Semba, M. Hirai
A THREE-DIMENSIONAL DUCTILE DAMAGE MODEL APPLIED TO DEEP-DRAWING FORMING LIMITS, Pages 1047-1053, J. Lemaitre
ON THE LAW OF MIXTURE IN DUAL PHASE STEELS, Pages 1055-1061, M.T. Ma, D.G. Wang, B.R. Wu
THERMOACTIVATION ANALYSIS OF FATIGUE CRACK GROWTH OF ALUMINIUM ALLOYS, Pages 1063-1068, V.S. Ivanova, L.I. Maslov, S.A. Kunavin, T. YokoborP
TENSILE BEHAVIOR AND FRACTURE CHARACTERISTICS OF A DUAL-PHASE Fe/Mn/C STEEL, Pages 1069-1075, De-Zun Wang
APPLICATION OF THE J INTEGRAL CONCEPT TO MICROSCOPIC FRACTURE MECHANICS, Pages 1077-1083, Masanori Kikuchi, Hiroshi Miyamoto
QUASI-STATIC AND IMPACT FRACTURE TOUGHNESS OF 5140 H STEEL AFTER DIFFERENT THERMAL TREATMENTS, Pages 1085-1094, J.R. Klepaczko, A. Solecki
THE INFLUENCE OF MICROSTRUCTURE AND TEMPERATURE ON STATIC AND DYNAMIC FRACTURE INITIATION IN HEAT RESISTANT STEEL, Pages 1095-1099, Z. Bílek, J. Buchar, M. Holzmann
EFFECT OF SULFUR CONTENT ON FRACTURE BEHAVIOUR OF Ni-Cr-Mo-V STEEL, Pages 1101-1107, Y. Tanaka, T. Iwadate
MICROMECHANICS OF FRACTURE IN MICROALLOYED STEEL, Pages 1109-1115, A.N. Kumar, R.K. Pandey
AN INTERPRETATION OF SCATTER AND THICKNESS EFFECT OF FRACTURE TOUGHNESS IN THE TRANSITION REGION, Pages 1117-1123, Naotake Ohtsuka
THE DETERMINATION OF S-N CURVES WITH PRE-CRACKED SPECIMENS, Pages 1125-1129, J.T. Wang
INFLUENCE OF CREEP VOID GROWTH ON MOTION OF A MACRO-CRACK, Pages 1131-1137, A. Neimitz
MECHANICAL PROPERTIES OF SURFACE COATED MATERIALS, Pages 1139-1158, A.S. Argon
PRESS FORMING PROBLEMS OF HSLA STEEL SHEETS, Pages 1159-1176, K. Miyauchi
MECHANICAL BEHAVIOR OF ENERGETIC POLYMERIC MATERIALS, Pages 1177-1185, S. Nicolaides, D. Wiegand, J. Pinto
ANELASTIC CREEP BEHAVIOUR OF RR-58 ALUMINIUM ALLOY AT 180°C, Pages 1187-1193, L.O. Bueno
BEHAVIOUR OF MATERIALS AT HIGH TEMPERATURES, Pages 1195-1211, D.R. Hayhurst, F.A. Leckie
RELIABILITY-BASED FATIGUE-PROOF DESIGN OF COMPOSITE MATERIALS, Pages 1213-1219, H. Ishikawa, A. Tsurui, T. Tanimoto, HL Kimura
MECHANICAL PROPERTIES OF MAGNETIC COMPOSITES, Pages 1221-1225, R.K.T. Hsieh
THE EFFECT OF NON-LINEAR STRAIN PATHS ON THE PLASTIC PROPERTIES OF STEELS, Pages 1227-1233, W.B. Hutchinson, T. Davis
RELATIONSHIP BETWEEN MICROSTRUCTURE AND HYDROGEN EMBRITTLEMENT IN FRACTURE MECHANICS ASPECT, Pages 1235-1240, J. Romanski
AUTHOR INDEX, Pages 1241-1244
SUBJECT INDEX, Pages 1245-1252