دانلود کتاب Proceedings of the 18th Annual Conference on Composites and Advanced Ceramic Materials - B: Ceramic Engineering and Science Proceedings, Volume 15, Issue 5

توضیحاتی در مورد کتاب به زبان اصلی :

This volume is part of the Ceramic Engineering and Science Proceeding  (CESP) series.  This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Content:
Chapter 1 Comparison of Flexure Creep Behavior of Silicon Nitride Between Static and Cyclic Loading at Elevated Temperature (pages 589–596): Sung R. Choi and Jonathan A. Salem
Chapter 2 Elevated Temperature Slow Crack Growth of Silicon Nitride Under Dynamic, Static and Cyclic Flexural Loading (pages 597–604): Sung R. Choi, Jonathan A. Salem, Noel Nemeth and John P. Gyekenyesi
Chapter 3 High?Resolution Electron Microscopy of Precycled Samples of a Sintered Silicon Nitride (pages 605–616): Jayant Neogi, Suneeta S. Neogi, Jag Sankar and Ranji Vaidyanathan
Chapter 4 Effects of Prior Cyclic Loading on the Strength of HIPed Silicon Nitride (pages 617–624): R. Berriche and R. T. Holt
Chapter 5 Fluid?Assisted Fatigue Crack Growth in Si3N4 (pages 625–633): Daping Yao and J. K. Shang
Chapter 6 Tensile Creep Behavior of Alumina Under Static and Cyclic Loading (pages 634–641): N. Dey and D. F. Socie
Chapter 7 Grain?Size Effect on High Temperature Fatigue Crack Growth in Polycrystalline Al2O3 (pages 642–650): C. H. Huang, J. K. Shang and J. F. Stubb
Chapter 8 Mechanical Properties of Reaction?Bonded Al2O3/ZrO2 Composites (pages 651–660): D. Holz, M. Roger, R. Janssen and N. Claussen
Chapter 9 ICP Sintering of Attrition?Milled Al2O3 — 5wt% Al Precursor: Effect of Power Input and Gas Pressure (pages 661–668): Seung H. Kim and Shome N. Sinha
Chapter 10 Formation of Needle?Like Grains in Al2O3 (pages 669–676): D. E. Garcia, J. Wendorff, R. Janssen and N. Claussen
Chapter 11 Effect of Processing Parameters on Densification and Mechanical Properties of Gas?Pressure Sintered Silicon Nitride (pages 677–684): T. N. Tiegs, N. A. Gorey, S. D. Nunn, P. A. Menchhofer, D. L. Barker and C. A. Walls
Chapter 12 Development of a High?Perforinance Si3N4 Material: Using Transient?Liquid?Phase and Self?Reinforcing Technology (pages 685–693): C. James Hwang, Sharon M. Fuller and Donald R. Beaman
Chapter 13 Synthesis of Nanocrystalline Alumina and Alumina?Zirconia Composites by a Combustion Assisted Process (pages 694–701): S. B. Bhaduri, R. Radhakrishnan and D. Linch
Chapter 14 SiC Platelet Reinforced Al2O3 Composites by Free Sintering of Coated Powders (pages 702–709): X. Yang and M. N. Rahaman
Chapter 15 Powder Processing of Intermetallic?Base Composites (pages 710–717): D. E. Alman and N. S. Stoloff
Chapter 16 Magnetoplumbite Compounds as a Fiber Coating in Oxide/Oxide Composites (pages 721–728): Michael K. Cinibulk
Chapter 17 MOCVD of Beta Alumina (pages 729–730): Peter W. Brown and S. Sambasivan
Chapter 18 Glass?Ceramic Sol Gel Coating of Ceramic Fibers (pages 731–742): Guillermo R. Villalobos and Robert F Speyer
Chapter 19 Development of Oxide Coatings for Matching Oxide Fiber?Oxide Matrix Composites (pages 743–752): L. C. Lev and A. S. Argon
Chapter 20 Low Temperature Deposition of Silicon Nitride Coatings on Fibers for CMCs (pages 753–759): David R. Harding, Elisabeth Blanquet, Jeffery Eldridge and Ramakrishna Bhatt
Chapter 21 Molybdenum?Palladium Fiber?Matrix Interlayers for Ceramic Composites (pages 760–768): R. S. Hay, T. Mah and C. Cooke
Chapter 22 Experimental Observation of the Failure Mechanisms of Metal/Ceramic Interfaces Under Mode I Loading (pages 769–776): Wayne E. King, G. H. Campbell, S. L. Stoner and W. L. Wien
Chapter 23 Gallium and Germanium Substitutions in Celsian (pages 778–786): James A. Zaykoski and Inna G. Talmy
Chapter 24 Stability of Ain?SiC Whisker Composites Containing Sintering Aids (pages 787–795): Thomas J. Mroz
Chapter 25 Implications of Fiber Stress Rupture on Lifetimes of Ceramic Matrix Composites (pages 796–806): G. V. Srinivasan and W. A. Curtin
Chapter 26 Fracture Modes in Initially?Cracked Concentric Cylinders (pages 807–816): R. Y. Kim, A. S. Crasto and N. J. Pagano
Chapter 27 New Hardness Standard Reference Materials (SRM's) for Advanced Ceramics (pages 817–826): R. J. Gettings, G. D. Quinn, A. W. Ruff and L. K. Ives
Chapter 28 Crack Growth Behavior of SiCf/SiC Composite at Room and High Temperatures (pages 827–836): S. Raghuraman, J. F. Stubbins, M. K. Ferber and A. A. Wereszczak
Chapter 29 Fracture Toughness by the Surface Crack in Flexure (SCF) Method (pages 836–845): Carl A. Tracy and George D. Quinn
Chapter 30 Fracture Toughness by the Surface Crack in Flexure (SCF) Method: Results of the Vamas Round Robin (pages 846–855): George D. Quinn, Robert J. Gettings and Jakob J. Kubler
Chapter 31 The Effect of the Thermo Mechanical Properties of the Grain Boundary Phase on the Fracture Toughness of Laser?Derived Silicon Nitride (pages 856–858): Remco Van Weeren and S. C. Danforth
Chapter 32 Effect of Specimen Shape on Fracture Toughness and Effective Fracture Energy in SiC?SiC Composite (pages 859–866): Mineo Mizuno, Yasuo Nagano, Hatsuhiko Usami and Yutaka Kagawa
Chapter 33 Results of a Round Robin Exercise on the Fractography of Advanced Structural Ceramics (pages 867–876): Jeffrey J. Swab and George D. Quinn
Chapter 34 Fracture Toughness of Ceramics in the Ain?SiC System (pages 877–884): R. N. Katz, S. Grendahl, K. Cho, I. Bar?On and W. Rafaniello
Chapter 35 Four Point and Biaxial Flexure Strength of PZT Ceramics: A Probabilistic Approach (pages 885–894): M. E. Manley, T. Erturk, C. Vaucamps and D. Gailus
Chapter 36 Scale?Up and Modeling of Forced Chemical Vapor Infiltration (pages 896–907): T. M. Besmann, J. C. Mclaughlin and T. L. Starr
Chapter 37 Fabrication of SiC Matrix Surface Composites by Chemical Vapor Infiltration with Microwave Heating: Temperature Effects (pages 908–915): Paul S. Day, Daniel J. Skamser, Hamlin M. Jennings and D. Lynn Johnson
Chapter 38 Hybrid Microwave?Assisted Chemical Vapor Infiltration of Alumina Fiber Composites (pages 916–923): Daniel J. Skamser, Paul S. Day, Hamlin M. Jennings and D. Lynn Johnson
Chapter 39 Adaptive Numerical Techniques for Reactive Vapor Infiltration (pages 924–931): S. Adjerid, J. E. Flaherty, M. S. Shephard, Y. J. Wang, W. Hillig, J. Hudson and N. Patibandla
Chapter 40 Knowledge?Based Decision?Support Systems for Rapid and Efficient Production Planning in CMC Fabrication (pages 932–942): R. Pitchumani and V. M. Karbhari
Chapter 41 Interfacial Diffusion and Reaction Mechanisms in Coated Fiber Reinforced Glass?Ceramic Composites (pages 942–950): Ellen Y. Sun, Steven R. Nutt and John J. Brennan
Chapter 42 Improved Carbon Coatings for Silicon Carbide Whiskers (pages 951–958): Thomas J. Mroz, Eric A. Groat, John P. Buckner and Joseph M. Prinzbach
Chapter 43 Carbon Coating of Ceramic Materials by Pyrolysis of Polymeric Based Systems (pages 959–966): Edmund H. Moore and Kimberly Andrews
Chapter 44 Oxidation of Carbon in Fiber?Reinforced Ceramic Matrix Composites (pages 967–976): J. D. Cawley, A. J. Eckel and T. A. Parthasarathy
Chapter 45 Effect of Ta2O5 Matrix Additions on the Microstructure and Mechanical Properties of SiC Fiber?Reinforced Lithia?Alumina?Silica Composites (pages 977–988): Hyun?Ho Shin, Randolph Kirchain and Robert F. Speyer
Chapter 46 The Effect of Fiber Coating Thickness on the Interfacial Properties of a Continuous Fiber Ceramic Matrix Composite (pages 989–1000): Edgar Lara?Curzio, Mattison K. Ferber and Richard A. Lowden
Chapter 47 Microwave Condensation and Densification of Porous Silica Gel (pages 1002–1010): J. P. Zhong, Z. Fathi, G. P. Latorre, D. C. Folz and D. E. Clark
Chapter 48 Repair of Glass by Sol?Gel Coating and Heating with Microwave or Conventional Techniques (pages 1011–1018): A. Boonyapiwat, J. J. Mecholsky and D. E. Clark
Chapter 49 Micro?Laminate Ceramic/Ceramic Composites (YSZ/Al2O3) by Electrophoretic Deposition (pages 1019–1027): P. Sarkar, O. Prakash, G. Wang and P. S. Nicholson
Chapter 50 Synthesis of Ti3SiC2?Based Materials Using Microwave?Initiated SHS (pages 1028–1035): P. Komarenko and D. E. Clark
Chapter 51 Potential Interlayer Materials for the Microwave Joining of Alumina (pages 1036–1043): A. D. Cozzi, D. E. Clark, W. D. Porter and O. B. Cavin
Chapter 52 Densification and Defect Chemistry Related to the Varistor Performance of ZnO?Based Ceramics (pages 1044–1051): M. C. S. Nobrega and J. K. West
Chapter 53 Electrophoretic Deposition of Silica/Alumina Colloids for the Manufacture of CMC's (pages 1052–1059): T. J. Illston, C. B. Ponton, P. M. Marquis and E. G. Butler
Chapter 54 Sol?Gel Processing of Continuous Mullite Fibers (pages 1060–1067): S. Al?Assafi, T. Cruse, J. H. Simmons, A. B. Brennan and M. D. Sacks
Chapter 55 Processing and Characterisation of Monolithic Molybdenum Disilicide and Silicon Carbide Fibre?Reinforced MoSi2 Matrix Composites (pages 1068–1075): A. R. Bhatti
Chapter 56 Optimisation of an Alumina Slip for Pressure Filtration (pages 1076–1083): D. H. Pearce, C. B. Ponton and A. J. Jickells
Chapter 57 High Temperature Strength and Toughness of Electrophoretically Deposited Alumina/Lanthanum Aluminate Laminates (pages 1084–1092): Melinda Bissinger, O. Prakash, Partho Sarkar and Patrick S. Nicholson
Chapter 58 Preceramic Polysilazanes for Structural Applications (pages 1093–1101): Stuart T. Schwab, Renee C. Graef, Cheryl R. Blanchard, Yi?Ming Pan, David L. Davidson, Gary E. Maciel, Bruce L. Hawkins, Steven F. Dec, Mark F. Davis and Russ Lewis
Chapter 59 Thermal Conductivity of Uniaxial Coated Fiber?Reinforced Composite with Thermal Barriers (pages 1102–1109): J. R. Thomas, K. Y. Donaldson and D. P. H. Hasselman
Chapter 60 Non?Planar Al2O3YPSZ Laminates Byelectrophoretic Deposition Using Al2O3 Fibre Electrodes (pages 1110–1117): M. Whitehead, P. Sarkar and P. S. Nicholson
Chapter 61 Microwave Plasma Etching of Si3N4 (pages 1118–1127): Vincent A. Knapp, Dale E. Wittmer, Josep H. J. Conover and Charles W. Miller
Chapter 62 Processing and Microstructure of a Ce?Doped IN SITU O'+?? SiAION Composite (pages 1128–1137): Chao M. Huang, Youren Xu, Avigdor Zangvil, Waltraud M. Kriven and Dennis N. Coon
Chapter 63 Influence of a Reduced Cross Section on the Mechanical Properties of Transformation?Toughened Zirconia Bars (pages 1138–1145): Douglas R. Wing and Gary S. Fischman
Chapter 64 Surface Modification in a 2.45 GHz Microwave Field (pages 1146–1153): Z. Fathi, D. C. Folz, R. L. Schulz, D. E. Clark and R. Hutcheon
Chapter 65 A SiC/Combustion?Synthesized ???SiAlON Composite (pages 1154–1163): Chao M. Huang, Youren Xu, Dong Zhu and Waltraud M. Kriven
Chapter 66 Ultrasonic Assessment of Oxidation Damage in SiC/RBSN Composites (pages 1164–1173): S. I. Rokhlin, Y. C. Chu, A. I. Lavrentyev, G. Y. Baaklini and R. T. Bhatt
Chapter 67 Microstructural Characterization of Composites via Electrical Measurements (pages 1174–1181): R. Gerhardt