دانلود کتاب Sensors and Microsystems: Proceedings of AISEM 2022

فهرست مطالب :

Preface Associazione Italiana Sensori E Microsistemi Steering Committee Contents Albumin-Based Optical and Electrochemical Biosensors for PFAS Detection: A Comparison 1 Introduction 2 Materials and Methods 2.1 Reagents and Materials 2.2 Optical Biosensor: Preparation and Preliminary Tests 2.3 Impedimetric Biosensor: Preparation and Preliminary Tests 2.4 Scanning Electron Microscopy Imaging 3 Results and Discussion 3.1 Optical LMR-Based Biosensing: Preliminary Results 3.2 Impedimetric Biosensing: Preliminary Results 3.3 Comparison of the Platforms 4 Conclusions References Coronavirus Label-Free Immunosensor: Preliminary Results 1 Introduction 2 Experimental Section 2.1 Materials and Reagents 2.2 Apparatus and Techniques 2.3 Theoretical Methods 2.4 Fabrication of CoV-229E Label-Free Electrochemical Immunosensor 3 Results and Discussion 3.1 Electrochemical Characterization of the Immunosensor Build-Up 3.2 Preliminary Analytical Performances 4 Conclusion References Characterization of Temperature Distribution in Microfluidic Chip for DNA Amplification 1 Introduction 2 Structure of the System Measurement 2.1 System-on-Glass (SoG) 2.2 Microfluidic Chip 3 Experiments and Results 4 Conclusions References Compliant Multi-hinge Microgripper for Biomanipulation: Microbeads Grasping Feasibility Study 1 Introduction 2 Design and Operating Principle 3 Microbeads Grasping Feasibility Study 4 Conclusions References Investigation on the Sensing Properties at Room Temperature of a Graphene/SnO2 Nanocomposite Towards CO2 1 Introduction 2 Experimental 2.1 Synthesis of the Materials 2.2 Material Characterization Techniques 3 Results and Discussion References 3D-Printed Face Mask with Integrated Sensors as Protective and Monitoring Tool 1 Introduction 2 System Structure 2.1 Hardware Structure 2.2 Software Structure 2.3 3D-Printed Mask 3 Measurements 4 Conclusions References Capacitive Gas Sensors with Porphyrinoids Coated SiO2 Hybrid Nanoparticles 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusions References Detection of Volatile Organic Compounds by Using a Nanoporous Zeolite Layer 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Role of IR and UV-Vis Spectroscopies Combined with Electrical Measurements in Materials Relevant for Gas Sensing 1 Introduction 2 Materials and Methods 3 Results and Discussion References A High Accuracy QCM Based Sensing System for in Water Ammonia Monitoring 1 Introduction 2 Sensing Material and Principle 3 Materials and Methods 3.1 Materials 3.2 Methods 4 Results and Discussions 4.1 Surface Cleaning and Self Assembled Monolayer Formation 4.2 QCM Measurements 5 Conclusions References A Portable Electrochemical Platform for Cobalt Detection In-Field 1 Introduction 2 Materials and Methods 2.1 Chemicals 2.2 Apparatus 2.3 Cyclic Voltammetry Characterization 2.4 Cobalt Detection 3 Results and Discussion 3.1 Electrochemical Sensor Surface Characterization 3.2 Lead and DMG Concentration Optimization 3.3 Cobalt Detection in Standard Solutions 3.4 Cobalt Detection in Real Samples 4 Conclusions References Ethanol and Glucose Determination by DCFC Working in Batch or Flow Mode 1 Introduction 2 Experimental 3 Results and Discussion 4 Conclusion References Voltammetric Determination of H2O2 Using a GC-LDH-Proline Catalytic Sensor 1 Introduction 2 Experimental 3 Results and discussion 4 Conclusion References Colorimetry by a Smartphone 1 Introduction 2 Samples and Smartphone Setups 3 Results of Colorimetric Measurements 4 Conclusions and Perspectives References Nafion-Based Chipless RFID Humidity Sensor for Smart Tag Applications 1 Introduction 2 Sensor Simulation, Fabrication, and Measurement Set-Up 3 Sensor Experimental Characterization 4 Conclusions References Metal Nanoparticles on Board of Low-Cost Devices for Optical Sensing 1 Introduction 2 Materials and Methods 2.1 Reagents and Apparatus 2.2 Nanostructured Plasmonic-Active Film Fabrication 2.3 Oxidants Capacity Evaluation 2.4 Oxidant Capacity Indexes and Parametrization 3 Results and Discussion 3.1 Nanostructured Film Assembling 3.2 Sensing Strategies, Performances, and Reactivity Indexes 3.3 Platform Storability 4 Conclusions References Soiling Detection Investigation in Solar Irradiance Sensors Systems 1 Introduction 2 Experimental Background 2.1 Site and Instrumentation Description 2.2 Methodologies References Actively Controlled Synchronized-Switch Harvesting on Inductor for Piezoelectric Transducers 1 Introduction 2 The Proposed Solution 2.1 Simulation Results 2.2 Experimental Results 3 Conclusions References LoRa-Based Wireless Sensor Network System for Aquatic Elements and Flood Early Warning Monitoring 1 Introduction 1.1 Communication Technology Overview 2 System Architecture 3 Conclusions References Quartz Crystal Microbalance Study in Controlled Environment for Particulate Matter Sensing 1 Introduction 2 Experimental 2.1 The QCM Sensor System 2.2 The PM Chamber for the QCM Study in Controlled Environment 2.3 The QCM Exposure to PM 3 Results and Discussion 4 Conclusion References 3D-Printed Capacitive Accelerometers 1 Introduction 2 3D Printing Technology 2.1 Main Features and Design Flow of 3D Printing 3 Capacitive Accelerometers 3.1 Basic Operation and Principles 3.2 Tested Geometries 4 Experimental Results 4.1 Experimental Setup and Results 5 Conclusion References A Novel Sensor Node for Smart Personal Protective Equipment 1 Introduction 2 Sensor Node 3 Software 4 Lab Trials 5 Conclusions References Radar Sensor System for Unobtrusive Level Monitoring of Granular Solids Stored in Silos 1 Introduction 2 System Description 3 Experimental Results 4 Conclusions References Fusion Analysis of a Palmprint-Hand Geometry Multimodal Ultrasound Recognition System 1 Introduction 2 Experimental Set-Up 3 Feature Extraction 4 Experimental Results 5 Conclusions and Discussion References Algorithm for Velocity Estimation in a Multivariable Motion Sensor 1 Introduction 2 Multivariable Motion Sensor and Proposed Estimation Algorithm 3 Simulation Results 4 Experimental Results 5 Conclusions References Analysis of Logic Schemes for the Optical Implementation of Pointwise Operations in Gated Recurrent Unit Cells 1 Introduction 2 Equivalent Circuits for Pointwise Operations 3 Simulation Settings 4 Results 5 Conclusions References Deep Learning for a Comprehensive Transformer Fault Detection Through Vibrational Data 1 Introduction 1.1 Experimental Set-Up 1.2 Outline of the Analysis 2 Analysis 3 Conclusions References PM Sensor Based on Piezoelettric MEMS: Mock Up 1 Introduction 2 Materials and Methods 3 Results 4 Conclusion References Assessment of Piezolectric Properties on Prototype BZT-BCT Devices 1 Introduction 2 Materials and Methods 2.1 Prototype Device Fabrication 2.2 BZT-BCT Thin Films Crystal Structure and Morphological Characterization 2.3 Prototype Ferroelectric and Piezoelectric Characterization 3 Results 3.1 Thin Layer Morphology and Crystal Structure 3.2 Dielectric, Ferroelectric, Resistive and Piezoelectric Properties 4 Conclusions References Smart Internet of Things (IoT) System for Construction Sites Monitoring 1 Introduction 2 Technology Overview 2.1 UHF Radio-Frequency Identification 2.2 MQTT Communication Protocol 3 System Design 3.1 Working Principles 4 Demo Scenario 4.1 Remote Server 5 Conclusions References Author Index